| 引用本文: | 廖卫中,宗群,马亚丽.小型四旋翼无人机建模与有限时间控制[J].控制理论与应用,2015,32(10):1343~1350.[点击复制] |
| Liao Wei-zhong,ZONG Qun,MA Ya-li.Modeling and finite-time control for quad-rotor mini unmanned aerial vehicles[J].Control Theory and Technology,2015,32(10):1343~1350.[点击复制] |
|
| 小型四旋翼无人机建模与有限时间控制 |
| Modeling and finite-time control for quad-rotor mini unmanned aerial vehicles |
| 摘要点击 3516 全文点击 3218 投稿时间：2015-05-19 修订日期：2015-08-02 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2015.50419 |
| 2015,32(10):1343-1350 |
| 中文关键词 四旋翼无人机 快速终端滑模控制 有限时间控制 |
| 英文关键词 quadrotor fast terminal sliding mode control finite-time control |
| 基金项目 国家“863”高技术计划项目(2013AA122602), 天津市应用基础及前沿技术研究计划项目(11JCZDJC25100)资助 |
|
| 中文摘要 |
| 本文首先介绍了一种小型四旋翼无人机的设计过程, 从机架设计、动力匹配、机载控制器、传感器、无线通
信等多个方面进行了较为详尽的阐述. 采用牛顿―欧拉法对四旋翼无人机进行动力学分析, 完成了六自由度数学
模型的推导. 进一步对系统的模型参数进行了测量和计算, 并给出了结果. 在此基础上, 为了满足无人机快速跟踪
性能的要求, 本文基于快速终端滑模的思想, 进行了闭环控制器的设计, 并给出了基于Lyapunov函数的稳定性证明.
控制器采用分环控制的结构形式, 内环为姿态控制, 外环为位置控制. 最后结合设计的四旋翼无人机, 给出的仿真结
果验证了控制算法的有效性. |
| 英文摘要 |
| We start by giving the detailed design process for a quad-rotor mini unmanned aerial vehicle, including the
airframe design, propulsion system, autopilot, sensors and wireless communication. By using Newton-Euler’s laws, we
analyze the dynamics of such an aerial vehicle to derive for it a 6-degrees mathematical model with parameter values
measured and calculated. To meet the requirement on fast tracking performance, we develop a closed-loop control system
based on the concept of fast terminal sliding-mode control, and prove its stability by using Lyapunov function. This control
system is composed of two nested control loops: the inner loop for the attitude control and the outer loop for the position
control. Simulation results show that the proposed method can provide robustness and good tracking performance for the
designed quad-rotor mini unmanned aerial vehicle. |
|
|
|
|
|