引用本文:周波,钱堃,马旭东,戴先中.基于集员估计的室内移动机器人多传感器融合定位[J].控制理论与应用,2017,34(4):541~550.[点击复制]
Zhou Bo,Qian Kun,Ma Xudong,Dai Xianzhong.Multi-sensor fusion for mobile robot indoor localization based on a set-membership estimator[J].Control Theory and Technology,2017,34(4):541~550.[点击复制]
基于集员估计的室内移动机器人多传感器融合定位
Multi-sensor fusion for mobile robot indoor localization based on a set-membership estimator
摘要点击 3499  全文点击 2603  投稿时间：2016-04-08  修订日期：2017-01-11
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2017.60209
  2017,34(4):541-550
中文关键词  移动机器人  定位  扫描匹配  集员滤波  数据融合
英文关键词  mobile robot  localization  scan matching  set member filter  data fusion
基金项目  国家自然科学基金项目(61673254, 61573100, 61573101), 复杂工程系统测量与控制教育部重点实验室开放课题(MCCSE2012B04)
作者单位E-mail
周波* 复杂工程系统测量与控制教育部重点实验室东南大学自动化学院 zhoubo@seu.edu.cn 
钱堃 复杂工程系统测量与控制教育部重点实验室东南大学自动化学院  
马旭东 复杂工程系统测量与控制教育部重点实验室东南大学自动化学院  
戴先中 复杂工程系统测量与控制教育部重点实验室东南大学自动化学院  
中文摘要
      本文针对室内移动机器人的长距离实时鲁棒定位问题进行了研究, 考虑到单一定位手段存在的不足, 以二维扫描激光和里程计作为主要的定位设备, 采用多传感器数据融合技术实现了移动机器人的精确定位. 论文首先 通过引入基于点--直线特征匹配的改进迭代最近邻(iterative closest point, ICP)扫描匹配方法对激光采集的环境点云信息进行迭代匹配以得到相对位姿变换估计, 并推导了其估计不确定性的保守包络矩阵形式, 然后通过建立定位过程和观测模型, 引入扩展非线性集员滤波器作为多传感器融合方法, 利用扫描匹配结果校正由里程计滑移带来的定位误差, 并获取定位自身的不确定性边界估计. 实验结果表明了本文所提出的室内定位方法的精度、实时性和鲁棒性.
英文摘要
      The robust long-distance localization problem of indoor mobile robots is studied in this paper. Taking into account the defects produced by using only a single localization means, a 2D laser scanner and an odometer are adopted as the main localization devices, with their data fused to achieve precise localization of the mobile robot. An improved iterative closest point (ICP) algorithm based on the point-line matching approach is proposed to estimate the relative pose transformation of the robot from point clouds collected by the laser scanner, and the underlying uncertainties for the pose estimation are also derived as a conservative envelope matrix. Through establishing the localization process and measurement models, the extended nonlinear set membership filtering (ESMF) is introduced as a multi-sensor fusion method to correct the cumulative errors of the odometer with the scan matching data, and the boundary estimations of pose uncertainties are also obtained. Experimental results show that the accuracy, the real-time property and the robustness of the proposed indoor localization system can be guaranteed.