| 引用本文: | 曾小莉,王维庆,王海云.基于电流偏差的永磁同步电机滑模电流解耦控制[J].控制理论与应用,2022,39(11):2149~2160.[点击复制] |
| ZENG Xiao-li,WANG Wei-qing,WANG Hai-yun.Decoupled current control of permanent magnet synchronous motors drives with sliding mode control strategy based on current deviation[J].Control Theory and Technology,2022,39(11):2149~2160.[点击复制] |
|
| 基于电流偏差的永磁同步电机滑模电流解耦控制 |
| Decoupled current control of permanent magnet synchronous motors drives with sliding mode control strategy based on current deviation |
| 摘要点击 1521 全文点击 341 投稿时间：2021-09-27 修订日期：2022-07-17 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2022.10913 |
| 2022,39(11):2149-2160 |
| 中文关键词 永磁同步电机 电流解耦控制 偏差解耦 滑模控制 鲁棒性 |
| 英文关键词 permanent magnet synchronous motor current decoupling control deviation decoupling sliding mode control robustness |
| 基金项目 国家自然科学基金项目(52067020), 新疆自治区教育厅重点项目(XJEDU2019I009)资助. |
|
| 中文摘要 |
| 永磁同步电机(PMSM)矢量控制的目标是使PMSM表现优良的动态性能和稳态性能, 为解决同步旋转坐标
下dq轴电流存在耦合, 同时传统解耦方法在电感参数失配时解耦效果不佳的问题, 提出一种基于电流偏差的永磁
同步电机滑模电流解耦控制方法. 该方法在电流偏差解耦控制电机模型的基础上, 保证系统的良好的动态性能, 并
充分利用偏差解耦结构的灵活性, 引入新的Z控制函数, 设计滑模控制律, 使其运动在滑模阶段, 并且呈非线性光滑
特性, 以保证系统滑动模态, 抑制抖振, 从而实现dq轴电流较好的解耦效果, 同时提高系统在整个运动过程中因参数
摄动和外在扰动的鲁棒性, 保证系统的动态性能. 通过对传统解耦方法和新方法的仿真和实验对比分析, 验证所提
方法的可行性和有效性. |
| 英文摘要 |
| The purpose of field-oriented control (FOC) is to guarantee perfect dynamic and steady performance of permanent
magnet synchronous motors (PMSM). In order to solve the problem that the dq axis current coupling exists in the
synchronous rotating frame and the traditional decoupling method has poor decoupling effect when the inductance parameters
are mismatched, therefore a new decoupling control using sliding mode based on current derivation was proposed.
The method ensures good dynamic performance of the system on the basis of a current deviation decoupling control motor
model, fully utilizes the flexibility of a deviation decoupling structure, introduces a new Z control function, and designs
a sliding mode control law, which guarantees the movement of the sliding mode phase with smooth and nonlinear characteristics,
so as to ensure the sliding mode of the system and inhibit chattering, as well as to realize better decoupling
effect of the dq axis current, simultaneously improve the robustness of the system in the whole motion process due to the
parameter perturbation and the external disturbance, and ensure the dynamic performance of the system. The feasibility
and the effectiveness of the proposed method are verified by the simulation and experimental analysis of the traditional
decoupling method and the new method. |
|
|
|
|
|