引用本文:周丽芳,许爱德,李倩妮,朱景伟.考虑谐波影响的开关磁阻电机无位置技术研究[J].控制理论与应用,2021,38(2):177~186.[点击复制]
ZHOU Li-fang,XU Ai-de,LI Qian-ni,ZHU Jing-wei.The research for sensorless control of switched reluctance motor considering harmonic effects[J].Control Theory and Technology,2021,38(2):177~186.[点击复制]
考虑谐波影响的开关磁阻电机无位置技术研究
The research for sensorless control of switched reluctance motor considering harmonic effects
摘要点击 2101  全文点击 750  投稿时间:2020-02-14  修订日期:2020-08-24
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2020.00081
  2021,38(2):177-186
中文关键词  开关磁阻电机  无位置控制  电感谐波  差值电感  磁饱和
英文关键词  switched reluctance motor  sensorless control  inductance harmonics  difference inductance  magnetic saturation
基金项目  辽宁省科技创新基金项目(2018J12GX039)资助.
作者单位E-mail
周丽芳 大连海事大学 zlf19950812@163.com 
许爱德* 大连海事大学 2013046332@qq.com 
李倩妮 大连海事大学  
朱景伟 大连海事大学  
中文摘要
      针对用传统傅里叶级数相电感模型估计开关磁阻电机转子位置时直接忽略高次谐波, 仅考虑到基波或者 二次谐波, 导致位置估计精度不高的问题, 提出了一种考虑谐波影响的开关磁阻电机无位置控制方法. 该方法通过 对电感进行坐标变换以及差值电感辨识, 消除了傅里叶级数电感的直流分量、偶次谐波分量以及三的倍数次谐波 分量. 选取谐波含量最少的差值电感构建角度—–差值电感关系数学模型, 利用其特征点估算转子位置. 为了验证所 提算法的有效性以及正确性, 以一台12/8极开关磁阻电机为控制对象, 进行了仿真以及实验. 实验结果表明, 减少电 感谐波后估计转子位置精度提高, 且在较大电流条件下用差值电感估计转子位置角度时, 位置估计精度几乎不受电 机磁饱和因素的影响.
英文摘要
      For sensorless control of switched reluctance motor (SRM) based on inductance expressed by Fourier series, the position estimation accuracy of SRM is not high enough caused by ignoring the high-order harmonics directly and only considering the fundamental or the second-order harmonics when estimating SRM rotor position. To solve this problem, the sensorless control method of SRM considering the influence of harmonics is proposed. Through coordinate transformation and difference inductance identification, the dc component, even harmonic component and multiple harmonic component of Fourier series inductance are eliminated. Then the difference inductance with the least harmonic content is selected as the inductance curve to estimate the rotor position. The mathematical model of angle-difference inductance relationship is constructed. Rotor position is estimated by using characteristic points. To verify the effectiveness and correctness of the proposed algorithm, simulation and experiment are carried out on a 12/8 pole SRM. Experimental results show that the accuracy of rotor position estimation is improved after reducing the inductance harmonics. Meanwhile, it is almost not affected by the saturation factor of the motor when the differential inductance is used to estimate the rotor position angle under the condition of large current.