引用本文:王　兵，陈善本，黎文航，王建军.基于粗糙集理论的焊接过程建模方法[J].控制理论与应用,2004,21(3):411~414.[点击复制]
WANG Bing, CHEN Shan-ben, LI Wen-hang, WANG Jian-jun.Modeling method of the welding process based on rough set theory[J].Control Theory and Technology,2004,21(3):411~414.[点击复制]
基于粗糙集理论的焊接过程建模方法
Modeling method of the welding process based on rough set theory
摘要点击 1367  全文点击 1526  投稿时间：2003-01-20  修订日期：2003-06-27
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/j.issn.1000-8152.2004.3.016
  2004,21(3):411-414
中文关键词  焊接过程建模  粗糙集  铝合金脉冲钨极电弧(TIG)焊接
英文关键词  modeling of the welding process  rough set  aluminum alloy pulse TIG (tungsten inert gas) welding
基金项目  上海市科学技术委员会资助项目(021111116); 教育部高校博士点基金项目(20020248015).
作者单位
王　兵，陈善本，黎文航，王建军 上海交通大学 焊接工程研究所，上海200030 
中文摘要
      针对目前焊接建模的状况,针对一种比较典型的焊接材料和焊接方法———铝合金脉冲钨极电弧(TIG)焊接,提出一种基于粗糙集理论的建模方法,并对建模过程的主要步骤和关键问题作了阐述.实验结果表明,该模型精度和复杂度可以接受.该方法拓展了粗糙集理论的应用领域,并为焊接建模提供了一种新方法,具有较大的应用潜力.
英文摘要
      A new modeling method is proposed that is based on the rough set theory for a typical welding material and welding method-Aluminum alloy pulsed GTAW (gas tungsten arc welding).The main procedure of the method and the key problems were expatiated.The result shows that the precise and complexity of the model is acceptable.So it enlarges the application area of rough set theory and provides a new method for modeling in welding area,and has a large potential of wide application.