| 引用本文: | 谢扬球,谭永红.压电陶瓷执行器的非光滑三明治模型辨识与内模控制[J].控制理论与应用,2013,30(5):567~576.[点击复制] |
| XIE Yang-qiu,TAN Yong-hong.Identification and control of piezoceramic actuator using nonsmooth sandwich model[J].Control Theory and Technology,2013,30(5):567~576.[点击复制] |
|
| 压电陶瓷执行器的非光滑三明治模型辨识与内模控制 |
| Identification and control of piezoceramic actuator using nonsmooth sandwich model |
| 摘要点击 2726 全文点击 2040 投稿时间：2012-05-22 修订日期：2013-01-10 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2013.20564 |
| 2013,30(5):567-576 |
| 中文关键词 三明治迟滞系统 退化激励信号 扩展输入空间法 内模控制 |
| 英文关键词 sandwich system with hysteresis degenerated excitation signal expanded input space method internal model control |
| 基金项目 上海市科学技术委员会研究资助项目(09220503000, 10JC1412200); 上海市自然科学基金资助项目(09ZR1423400); 国家自然科学基金资助项目(60971004, 61171088, 61203108); 上海市教委科技创新资助项目(11YZ92). |
|
| 中文摘要 |
| 压电陶瓷执行器中含有非光滑、多值映射、频率依赖的非线性迟滞特性, 然而在实际应用中, 压电器件的输入输出信号无法直接测量, 常规方法难以进行有效的辨识和控制. 本文采用三明治模型来精确描述实际对象, 并提出一种基于退化激励信号的两步辨识法解决三明治迟滞模型的辨识问题. 最后, 基于已辨识的三明治模型, 设计一个内模控制器, 解决压电陶瓷执行器的精密轨迹控制问题. 实验结果表明所提出的辨识和控制方案取得了令人满意的结果. |
| 英文摘要 |
| As the hysteresis embedded in the piezoceramic actuator is a nonsmooth nonlinear and rate-dependent function with multivalued mapping, also the input and output of the hysteresis cannot be measured directly, it is very difficult to use the traditional schemes to identify and control such a system. In this paper, a piezoceramic actuator is described by a sandwich model and identified by a two-stage method based on the degeneration inputs. Then, according to the obtained sandwich model with hysteresis, an internal model control scheme is proposed. The experimental results are presented to illustrate the performance of the proposed identification and control scheme. |
|
|
|
|
|