引用本文: | 楚晓艳,年晓红,刘静静.基于鲁棒滑模观测器的多电机卷绕系统故障检测和隔离[J].控制理论与应用,2018,35(6):795~804.[点击复制] |
CHU Xiao-yan,NIAN Xiao-hong,LIU Jing-jing.Fault detection and isolation for multi-motor web-winding system via robust sliding mode observers[J].Control Theory and Technology,2018,35(6):795~804.[点击复制] |
|
基于鲁棒滑模观测器的多电机卷绕系统故障检测和隔离 |
Fault detection and isolation for multi-motor web-winding system via robust sliding mode observers |
摘要点击 2912 全文点击 1466 投稿时间:2017-05-26 修订日期:2017-11-26 |
查看全文 查看/发表评论 下载PDF阅读器 |
DOI编号 10.7641/CTA.2017.70353 |
2018,35(6):795-804 |
中文关键词 多电机卷绕系统 滑模观测器 故障检测 故障隔离 |
英文关键词 multi-motor web-winding system sliding mode observers fault detection fault isolation |
基金项目 国家自然科学基金项目(61473314, 61403425, 61621062, 61321003), 中南大学中央高校基本科研业务费专项资金(2017zzts130)资助. |
|
中文摘要 |
针对多电机卷绕系统故障检测和隔离问题, 提出了基于滑模观测器的鲁棒故障检测和隔离策略. 首先, 考
虑到多电机卷绕系统运行环境变化引起的摩擦系数、杨式模量、半径和转动惯量等参数的不确定性, 通过引入非线
性未知输入干扰对系统不确定参数进行描述, 将多电机卷绕系统转化为包含执行器故障的一般不确定非线性系统;
其次, 构造鲁棒滑模观测器并用作故障检测观测器, 通过滑模控制来抑制未知输入干扰, 使观测器具有鲁棒性, 在此
基础上, 结合多观测器故障隔离的思想, 提出了可以同时对多个执行器故障进行检测和隔离的方法; 然后, 根据李雅
普诺夫理论得到使观测器系统指数收敛的充分条件, 同时给出了观测器增益的求解方法; 最后, 仿真结果验证了所
提方法的鲁棒性和有效性. |
英文摘要 |
The robust fault detection and isolation strategy for multi-motor web-winding system with changing operating
environment is put forward. Firstly, taking into account the changes of the friction coefficients, Young’s modulus,
radii and the moments of the roller, etc. which are caused by the changing operating environment, the unknown input
disturbance is introduced to describe the system parameters uncertainties of the multi-motor web-winding system, based on
which a generalized nonlinear system dynamic model with actuator faults and uncertainties is constructed. Next, a robust
sliding mode observer is developed as fault detection observer to detect actuator faults. Furthermore, multi-observers are
used for the multi actuator faults isolation purpose. Then, according to the Lyapunov theory, the sufficient conditions of
exponential convergence for the designed observers are derived. Meanwhile, the observer gain matrix is presented. Finally,
the simulation is conducted to verify the robustness and effectiveness of the proposed method. |
|
|
|
|
|