| 引用本文: | 郑含博,杜齐,郭文豪,唐钰本,崔耀辉,覃团发.应用于光储系统中的改进型扰动观察MPPT算法[J].控制理论与应用,2022,39(3):491~498.[点击复制] |
| ZHENG Han-bo,DU Qi,GUO Wen-hao,TANG Yu-ben,CUI Yao-hui,QIN Tuan-fa.Improved perturbation and observation MPPT algorithm applied to a hybrid photovoltaic energy storage system[J].Control Theory and Technology,2022,39(3):491~498.[点击复制] |
|
| 应用于光储系统中的改进型扰动观察MPPT算法 |
| Improved perturbation and observation MPPT algorithm applied to a hybrid photovoltaic energy storage system |
| 摘要点击 1544 全文点击 521 投稿时间：2021-07-25 修订日期：2021-09-30 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2021.10663 |
| 2022,39(3):491-498 |
| 中文关键词 最大功率点跟踪 可变步长 稳态无振荡 光储混合系统 |
| 英文关键词 MPPT algorithm variable step size steady state without oscillation hybrid photovoltaic energy storage system |
| 基金项目 国家自然科学基金项目(51907034), 广西科技基地和人才专项科技资助项目(2020AC19010) 资助. |
|
| 中文摘要 |
| 本文提出了一种改进的步长可变、稳态时无振荡的扰动观察MPPT算法, 该改进算法在保持基本的扰动观
察法简单以及便于实现特点的同时, 还能停止稳态振荡并具备良好的追踪速度. 该算法首先通过变步长实现快速跟
踪最大功率点, 当确定到达稳态之后, 停止人工扰动, 实现无振荡稳定输出功率, 从而减少因振荡造成的功率损耗,
提高了整个系统的效率. 当外界环境突变时, 该算法运用三点测量法可以根据电压、电流值的突变检测出工作条件
的变化, 并重置参数, 从而降低重新追踪最大功率点的时间. 由于光伏发电的随机性与波动性, 通常将储能电池与光
伏组件相结合, 构成光储混合系统. 为了结合实际, 本文在MATLAB/Simulink中进行了光储混合系统的仿真与试验,
试验结果验证了所提算法的性能. |
| 英文摘要 |
| An improved perturbation and observation MPPT algorithm with variable step size and no oscillation in
steady state is proposed in this paper. The improved algorithm not only keeps the basic perturbation and observation
method simple and easy to implement, but also stops the steady-state oscillation and has good tracking speed. The proposed
algorithm firstly achieves fast tracking of the maximum power point by changing the step size. When the steady state is
determined, the artificial perturbation is stopped to achieve stable output power without oscillation, so as to reduce the
power loss caused by oscillation and improve the efficiency of the whole system. When there is an abrupt change in the
external environment, the algorithm can detect the change of working conditions according to the abrupt change of voltage
and current values by using the three-point measurement method, and reset the parameters, so as to reduce the time of
retracing the maximum power point. Due to the randomness and volatility of photovoltaic power generation, energy storage
batteries and photovoltaic modules are usually combined to form a hybrid photovoltaic energy storage system. In order to
match the actual situation, the simulation and experiment of the hybrid photovoltaic energy storage system are carried out
in MATLAB/Simulink in this paper, and the experiment results verify the performance of the proposed algorithm. |
|
|
|
|
|