引用本文: | 申富媛,李炜,蒋栋年,毛海杰.基于两阶段卡尔曼滤波的四旋翼无人机自主预测维护[J].控制理论与应用,2023,40(12):2265~2276.[点击复制] |
SHEN Fu-yuan,LI Wei,JIANG Dong-nian,MAO Hai-jie.Quadrotor UAV predictive maintenance utilizing a two-stage Kalman filter approach[J].Control Theory and Technology,2023,40(12):2265~2276.[点击复制] |
|
基于两阶段卡尔曼滤波的四旋翼无人机自主预测维护 |
Quadrotor UAV predictive maintenance utilizing a two-stage Kalman filter approach |
摘要点击 893 全文点击 339 投稿时间:2023-05-15 修订日期:2023-12-05 |
查看全文 查看/发表评论 下载PDF阅读器 |
DOI编号 10.7641/CTA.2023.30327 |
2023,40(12):2265-2276 |
中文关键词 四旋翼无人机 多执行器退化 健康度 预测性维 |
英文关键词 quadrotor UAV multiple actuator degradation health degree predictive maintenance |
基金项目 国家自然科学基金项目(62263020, 62063017)资助. |
|
中文摘要 |
本文针对多执行器退化的四旋翼无人机, 基于机体性能状态的健康感知, 通过反馈调节权值矩阵实现了无
人机的自主维护. 文中首先建立了四旋翼无人机退化模型, 并基于预测性维护和模型预测控制策略构建了自主预
测维护体系架构; 其次, 采用两阶段卡尔曼滤波法实时估计无人机机体状态和各执行器退化量, 并用熵权法将4个
执行器退化量融合为一综合退化量; 接着, 基于马氏距离健康度计算机体失效阈值, 求解无人机剩余寿命, 在无人机
不满足机体性能和时限性约束时, 依据健康度评价实时调整权值矩阵实现自主维护. 仿真结果表明, 本文提出的自
主预测维护方法能够有效延长机体寿命. |
英文摘要 |
In this paper, we propose a method to achieve autonomous maintenance of quadcopter unmanned aerial
vehicle(UAV) with multi-actuator degradation by adjusting the weight matrix based on the health-aware body performance
state. First, we establish a degradation model for quadrotor UAVs and then construct an autonomous predictive maintenance
architecture based on the predictive maintenance and model predictive control strategies. Second, a two-stage Kalman filter
method is used to estimate the body state of the UAV and the degradation of each actuator in real-time, and an entropy
weighting method is used to fuse the degradation of the four actuators into a comprehensive degradation. Then, we calculate
the failure threshold of the UAV based on the Mahalanobis distance health degree and solve the remaining lifetime of the
UAV. When the UAV does not satisfy the body performance and time-bound constraints, the weight matrix is adjusted in
real-time based on the health degree assessment to achieve autonomous maintenance. Simulation results show that the
proposed method can effectively extend the life of the airframe. |
|
|
|
|
|